HOME
Extra Pad Set
Assistant pad to reduce vibration to floor
A set of 4 pcs 100x100 mm thick pad to put underneath each leg of the trainer to reduce the vibration to floor. The material is exactly same to the one for Training Mat 2. It absorbs the vibration up to 75% for providing peaceful living-conditions to neighbors.
Training Mat 2 is originally designed for using with stationary trainer, so the pad area is too short to rollers. It would be good to put the extra pads underneath the legs on the plain sheet area to reduce the vibration.
Or, you can use these pads independently without any mat. At that time, your floor and carpet will not be protected from your sweat. You should place the trainer on a large towel or rag.
Extra Pad Set
Reducing Noise
Reducing vibration
There are two types of noise occurred from trainer; 1) direct noise from resistance unit, and 2) carried noise by vibration. Vibration reaches much further than we usually expect.
The direct noise cannot be muffled and it is depends on the trainer itself, but the vibration can be decreased. Noise often cause unnecessary troubles with neighbors, so it's essential to cut vibration to make everybody welcome to your indoor training.
The thick pad area absorbs the vibration to floor up to 75%. It is also a good idea to put cardboard sheet between the mat and floor.
Specs
SKU |
400-6420-01
|
|---|---|
Dimensions |
100 x 100 x 10 mm
|
Color |
Gray
|
Material |
Foamed urethane
|
Set Q'ty |
4 pcs
|
Net Weight |
100 grams
|
Country of Origin |
China
|
Cautions
Important Notices
- Pad is made of foamed material so it absorbs water very quickly and it takes long time to release the water once it's become wet. When you wash the pads, leave at least two days to dry completely.