HOME
Action Bridge
Supports front fork on rollers
Rollers is not an easy type of trainer for the beginners. You must maintain balance on the freely spinning roller drums. Actually, it's difficult, however, rollers can offer you a wonderful and enjoyable training experience rather than stationary trainers.
Action Bridge is a helper device for the beginners to support the bike with clamping the front fork. It doesn't mean you can ride rollers alone by using Action Bridge. It requires another practice.
Action Bridge is compatible with both Action Magroller & Advance and normal & wide versions. Maybe you can use it on old rollers such as Mag Roller II or TRO-2000.
The quick release skewer on the fork support is floating mounted in a urethane tube in order to prevent the damage to the front fork if you accidently twist the handlebar.
Action Bridge
Compatibility
Can be used every Action Magroller and Advance
Action Bridge is set to the vacant holes on the front frame of rollers.
You can install on every Action Magroller and Advance, including old Magroller II.
Professional models like AC-Pro or TRO-5500 series are not compatible.
By changing the bottom bracket direction, Action Bridge will be compatible with both normal (360mm) and wide (450mm) roller drum.
Just Supports Bike
Not for educating you to ride rollers without support
Action Bridge just supports the bike on rollers by clamping the front fork end. It allows just to help you when getting on/off the bike on rollers. It's not the device for educating you to enable to ride rollers alone.
You must maintain your balance by yourself to ride on rollers alone. To do so, you must learn what's the correct riding style, how you should set eye line, from where you should remove force, etc. For more detailed explanation, refer the rollers page.
Specs
SKU |
400-3202-00
|
|---|---|
Color |
Silver
|
Material |
Steel
|
Net Weight |
1.8 kgs
|
Cautions
Important Notices
- Maintain the installation point of Action Bridge correctly as well as the front roller drum position.
- The front quick release skewer is floating mounted in a soft urethane tube to absorb the shocks, but if you apply too much force to handlebar, the front fork may be damaged. Do not steer the handlebar while using.