Minoura Japan – True-Base

TRUE-BASE Wheel Truing Stand New_Icon_rd_01.png

Portable tool for consumers

TRUE-BASE is our entry level wheel truing stand. It's a portable tool for ordinary consumers, not for the prosumers.
TRUE-BASE is based on the previous TRUE-PRO 2 foldable truing stand. We changed the wheel axle holder from an angle adjustable type to a fixed type to reduce the cost in order to enable to hold the wheel more stable and eliminate any possible problem caused by the movable axle holder.

The gauges are exactly same to True-Pro and FT-1.
Both right and left side shaking gauge arms move together by rotating the knob. Each arm can widely open manually to allow the install the wheel with fat tire without changing the pre-set gauge position.
The vertical shaking gauge is length adjustable and foldable.

True-Base doesn't come with T-Guage for checking the gauge body position. T-Gauge is available as an option.

truebase_blank.jpgTrue-Base
truebase_folded.jpgtruebase_wheel.jpg

Specs

SKU
430-3250-00
Applicable Wheel Size
up to 29-inch (no minimum size)
Applicable Hub Width
85 - 145 mm
Dimensions
L 470 x W 200 x D 70 mm (folded)
Material
Steel (body) / Alloy (pillar)
Net Weight
1.9 kgs

Cautions

Important Notices

  • True-Base is just a portable wheel truing stand for ordinary people. Please understand the quality, stability and assuredness are lower than the professional model.
  • We don't guarantee that you can get precisely symmetric wheel by using just True-Base. You are required to use a wheel dishing tool.
  • Only for the wheels with 9mm quick release type or nut type hubs. Any thru axle type hub is not compatible (it requires optional axle holder).
  • When setting wheel on True-Base, tighten the quick lever while pushing down the axle. If the wheel has been slanted, you cannot expect correct job. Especially when tightening the lever, be careful the wheel doesn't move.
  • Rotate the wheel slowly to prevent vibration. Do not spin fast.
  • Wheel is one of the most important parts on your safety as well as the brake. If you are not confident to do proper maintenance job or if you don't have enough skill, we strongly recommend you to ask to a skilled mechanician.
  • Wheel truing must be done at your own risk. We are not responsible to any result your job will cause.

Options

T-Gauge
For checking the gauge body position

Data Download

Jump to [Data Download] page Doticon_grn_Right.png