HOME
DS-80S
Foldable bike stand focusing on maintenance
DS-80 is a foldable bike stand to stand the bike stable.
The bent top frame design offers easy access to the rear derailleur.
The frame is made of steel tubing to clamp the rear hub stiffly.
The leg is foldable for compact storage when not in use.
Left side (quick lever side) coupling rotates freely to accommodate with any quick lever direction.
DS-80S
Specs
SKU |
421-1146-00
|
|---|---|
Dimensions |
Opened: H 395 x W 290 x D 320 mm
Folded: L 480 x W 290 x D 75 mm
|
Finish |
Painted silver
|
Material |
Hollow steel
|
Net Weight |
0.8 kgs
|
Cautions
Important Notices
- DS-80 uses the spring tension of steel tubing, so the frames are bent intentionally narrower than the actual hub width for tighter fit. You open the frame by hands and clamp the rear hub.
- The coupling is designed to fit Shimano type quick release skewer (the lever comes from the side). The skewers which lever is sitting in the end of axle, the lever angle is wider than right angle even it's in closed position, or the lever width is wider than the cut-out on the coupling like Campagnolo or Fulcrum are not compatible.
- Use DS-30CF for the Campagnolo and Fulcrum wide lever skewer. It's the special model.
- It requires some force to open the frame because the frame is made of steel. To install DS-80 easier, should you hook the right side coupling to the hub acorn nut, then open the left side frame only. If your power is weaker than opening the frame, you should choose the alloy model DS-30AL.
- You are not allowed to get on the bike on DS-80.