HOME
DS-70N
Bike stand focusing on better stability
DS-70 is the bike stand which is focusing on greater stability rather than compactness.
Non-foldable frame design holds the bike very stable, especially to sideward.
The bent top frame design provides better accessibility to rear derailleur.
Frame is made of steel tubing and a reinforcement sub-frame is welded. This clamps the rear hub strongly.
Left side (quick lever side) coupling is angle adjustable (not rotatable) to fit any lever direction.
DS-70N
Specs
SKU |
421-1140-01
|
|---|---|
Dimensions |
H 375 x W 280 x D 255 mm
|
Finish |
Painted silver
|
Material |
Hollow steel
|
Net Weight |
0.9 kgs
|
Cautions
Important Notices
- DS-70 uses the spring tension of steel tubing, so the frames are bent intentionally narrower than the actual hub width for tighter fit. You open the frame by hands and clamp the rear hub.
- The coupling on DS-70 is the old type so it's not rotatable and the cut-out depth is shallower than other models.
- It fits Shimano type quick release skewer (the lever comes from the side) only. Any other skewers won't fit DS-70.
- Use DS-30CF for Campagnolo and Fulcrum wide lever skewer.
- It requires some force to open the frame because the frame is made of steel. To install DS-70 easier, should you hook the right side coupling to the hub acorn nut, then open the left side frame only. If your power is weaker than opening the frame, you should choose the alloy model DS-30AL.
- You are not allowed to get on the bike on DS-70.
- DS-70 is not foldable.