HOME
DS-30CF
Special model for Campagnolo & Fulcrum skewer
The special version of DS-30BLT for Campagnolo and Fulcrum's quick release skewer with wide lever. It's not universal to other sizes.
The recognition point is the blue (Campagnolo company color) left side coupling.
Note on Fulcrum quick release skewer :
DS-30CF is originally designed to be compatible with the previous type of skewer without hole on the lever.
It may be too tight to insert the newer skewer into the coupling which has a hole on the lever. This skewer is found on 2011 Racing-3 or higher grade wheels.
The base model is DS-30BLT so everything is exactly same to BLT.
The body is completely foldable to be super flat for compact storage when not in use.
Depends on the opening direction, DS-30 will provide two different heights (225mm / 365mm from ground) for better bike angle.
Taller height is for larger wheels such as 26" or 700c. Lower height is for smaller wheel bikes such as BMX or folding bikes.
The similar stand supplied from other companies is fully angle (height) adjustable, but it means you must adjust the angle (height) every time you use the stand.
Our DS-30 provides only two heights but it doesn't require such troublesome adjustment. Just open the frame. That's all.
DS-30CF
Specs
SKU |
421-1160-01
|
|---|---|
Dimensions |
Opened: H 380 x W 305 x D 285 mm
Folded: L 420 x W 305 x D 40 mm
|
Finish |
ED painted black
|
Material |
Hollow steel
|
Net Weight |
0.7 kgs
|
Cautions
Important Notices
- DS-30 uses the spring tension of steel tubing, so the frames are bent intentionally narrower than the actual hub width for tighter fit. You open the frame by hands and clamp the rear hub.
- The coupling of DS-30CF is designed to fit Campagnolo and Fulcrum's latest wide lever type skewer only.
- If you use DS-30CF for other skewer type like Shimano, the stability will have to decreased.
- It requires some force to open the frame because the frame is made of steel. To install DS-30 easier, should you hook the right side coupling to the hub acorn nut, then open the left side frame only.
- Rear derailleur may conflict the DS-30 frame depends on the gear position.
- You are not allowed to get on the bike on DS-30.
- No alloy model available.
- New DS-30CF is originally designed to be compatible with Campagnolo skewer. It may be too tight to use with 2011 Fulcrum Racing-3 or higher grade wheels due to different lever design.