Minoura Japan – DS-30BLT

DS-30BLT

Standard bike stand by clamping rear hub

The most popular type bike stand that clamps the rear hub from both sides to stand the bike alone.

The main body is made of lightweight but durable steel tubing. Rear hub is clamped firmly with its spring tension.
Left side (quick lever side) coupling can freely rotate to accommodate any lever direction.

The body is completely foldable to be super flat for compact storage when not in use.
Depends on the opening direction, DS-30 will provide two different heights (225mm / 365mm from ground) for better bike angle.
Taller height is for larger wheels such as 26" or 700c. Lower height is for smaller wheel bikes such as BMX or folding bikes.

The similar stand supplied from other companies is fully angle (height) adjustable, but it means you must adjust the angle (height) every time you use the stand.
Our DS-30 provides only two heights but it doesn't require such troublesome adjustment. Just open the frame. That's all.

ds30blt_blank.jpgDS-30BLT
ds30blt_low.jpgds30blt_folded.jpg
ds30blt_bike.jpgDS30BLT_lower_bike.jpg

Specs

SKU
421-1055-01
Dimensions
Opened: H 380 x W 305 x D 285 mm
Folded: L 420 x W 305 x D 40 mm
Finish
ED painted black
Material
Hollow steel
Net Weight
0.7 kgs

Cautions

Important Notices

  • DS-30 uses the spring tension of steel tubing, so the frames are bent intentionally narrower than the actual hub width for tighter fit. You open the frame by hands and clamp the rear hub.
  • The coupling is designed to fit Shimano type quick release skewer (the lever comes from the side). The skewers which lever is sitting in the end of axle, the lever angle is wider than right angle even it's in closed position, or the lever width is wider than the cut-out on the coupling like Campagnolo or Fulcrum are not compatible.
  • Use DS-30CF for the Campagnolo and Fulcrum wide lever skewer. It's the special model.
  • It requires some force to open the frame because the frame is made of steel. To install DS-30 easier, should you hook the right side coupling to the hub acorn nut, then open the left side frame only. If your power is weaker than opening the frame, you should choose the alloy model DS-30AL.
  • Rear derailleur may conflict the DS-30 frame depends on the gear position.
  • You are not allowed to get on the bike on DS-30.