HOME
971-3H
3-Tier bike display stand to suit extra high storage
This extra high elevated stand stores 3 bikes at different levels, for the best possible showing of the bikes.
The bikes are supported at both wheels, as well as the bottom bracket (where the cranks sit in the frame). It fits most standard full sized bikes.
The exceptions are bikes with MTB tires wider than 2.5” and bikes with wheels smaller than 20".
The Bottom Bracket Support is height adjustable and holds the BB shell, on the front, side and rear. This again will fit most bikes, but there will be exceptions for some carbon frames.
The Tire Holders can be set in 5 different positions, to suit different wheelbase sizes.
The dimensions of the frame itself are 920mm wide, 1340mm high and 850mm deep. Ideally it is placed next to the standard 971-3 stand, creating a 6-tier display.
The finishing is to the usual high Minoura standard and the unit will last for many years.
971-3H
Specs
SKU |
423-1720-00
|
|---|---|
Frame Dimension |
W 920 x D 850 x H 1,340 mm (excluding BB support and tire supports)
|
Color |
Gray metallic
|
Material |
Steel
|
Net Weight |
14.9 kgs
|
Options
Caster Kit
Fitting the 4 castor wheels on the outsides of the frame will allow easy maneuvering of the unit. There is also a reinforcement bar, to stop the tall legs from flexing during movements
Bottom Bracket Support for DH bikes
DH bikes have the bottom bracket higher and this kit gives an extended central support arm
Cautions
Important Notices
- Bikes with specially shaped Bottom Bracket shells, like some carbon frames, might not fit the central support arm safely.
- Bikes with tires of 2.5" or bigger, tandems, BMX and kids bikes are not compatible with this stand.