HOMEVC-100S / VC-100M 
Mounting camera on handlebar
Camera mount
VC-100 holds a digital camera or compact VCR on handlebar easily and quickly. You can take clear photos or video by using VC-100 instead of a tripod.
You install your camera to the 1/4" screw on the clamp, then tighten up the lock ring toward camera to hold it securely.
We don't recommend to use the camera while riding. It must be done at your own risk if you want to do.
Space-Mount Clamping Device
The lightweight and anti-rust alloy clamp fits various sizes of diameter flexibly. S-version fits the tube with 22 - 29mm diameter, and M-version fits 28 - 35mm diameter.
No tool required for installation and removal. You can do with just single lever operation.
Lock-Ring
Lock-Ring which holds the camera from bottom side has a special all-weather type cork pad to avoid slippage and to hold securely.
The ring itself is made of rust-proof stainless steel.
Two versions are available on VC-100;
VC-100-S |
S-size clamp (fits 22 - 29mm diameter)
Red logo printing color on the clamp arm
Fits standard handlebar
|
|---|---|
VC-100-M |
M-size clamp (fits 28 - 35mm diameter)
Black logo printing color on the clamp arm
Fits oversized handlebar and round/oval dimension stem
|
VC-100-S (22 - 29mm diameter)
VC-100-M (28 - 35mm diameter)
Specs
VC-100-S (for normal handlebar)
SKU |
339-3330-00
|
|---|---|
Applicable Diameter |
22 – 29mm(will not fit any oversized handlebar)
|
Logo Color |
Red
|
Material |
Light alloy / Stainless steel / Cork
|
Net Weight |
98 grams
|
VC-100-M (for oversized handlebar and stem)
SKU |
339-3331-00
|
|---|---|
Applicable Diameter |
28 – 35mm(will not fit any oversized handlebar)
|
Logo Color |
Black
|
Material |
Light alloy / Stainless steel / Cork
|
Net Weight |
100 grams
|
Cautions
Important Notices
- VC-100 is just a camera mount for using instead of tripod while you don't ride. It's not recommended to use during ride, and Minoura is not responsible to any trouble, damage or accident caused by using VC-100. It's your own risk.
- The screw to hold the camera is fixed on the clamp body, so you have to turn the camera to screw in. You cannot install the camera by just turning the lock-ring.
- Tighten up the lock-ring toward the camera firmly. We don't guarantee the camera stability when you don't use the lock-ring.
- The lock-ring will move freely when you don't install camera and you ride. To avoid missing the lock-ring during ride, we put a small rubber ring on the screw, but it's not perfect enough. Keep watching the rubber ring or remove VC-100 when you ride without camera.
- The cork pad on the lock-ring is a special all-weather type by containing rubber material, so it doesn't absorb moisture like as the standard cork. However, you should dry it if it has been wet.
- When you go away from your bike while mounting a camera, be careful the bike won't fall down due to the shock of moving handlebar.
- VC-100 doesn't have tilt function. Just swivel.
- Camera is a sensitive machine, and it's basically not so tough against vibration and shock. Be aware that holding camera on the vibrated bike may cause inside damage to the camera.
- Operate the lever with your finger body, not just the nail, to avoid any possible injury. The lever is closed strongly.
- The clamp may cause damage to the brake or shifter cable if it's installed beyond the cable. You should install VC-100 where no cable runs.
- Compatible with round dimension handlebar and stem only. Any other dimension won't fit.
- Minoura is not responsible to ant theft problem due to the quick removable clamp. You should take it out when you park bike.