Minoura Japan – BH-95X

BH-95X

Freely angle adjustable extra bottle cage holder

A holder to mount an extra bottle cage on handlebar or seat-post.

Stainless band clip fits the diameter flexibly between 22mm (7/8") and 35mm (1-1/4").

The holder has gear mechanism inside. You can set the angle at every 6 degrees.
By this feature, you can keep the bottle vertical at any position like the raised up area on riser bar. In addition, you can set the bottle at certain angle to enable to remove the bottle smoothly.

Bottle holder is made of anti-rust stainless steel.
Comes with bottle cage mounting screws.

bh95x_blank.jpgBH-95X
BH95X_handlebar.jpgBH95X_seatopost.jpgBH95X_seatpost-angled.jpg

Specs

  • SKU 339-1354-00
  • Color Black
  • Material Stainless steel
  • Net Weight 46 grams

Cautions

Important Notices

  • Due to the stainless band clip mechanism, you need to disassemble BH-95X for installation.
  • To change the bottle angle, you need to loosen the center screw. If you use Minoura bottle cage which has a hole on this area, you don't need to remove the bottle cage. But if you use another brand bottle cage, you need to remove the bottle cage.
  • If brake or shifting wire is along the handlebar, you may not be able to expect enough mounting strength. Mount on the area without any wire.

Modified Points

Angle Adjustment (BH-95N --> BH-95X)
Changed the angle adjustment from every 90 degrees to 6 degrees
Stainless Band Clip Capacity (BH-95N --> BH-95X)
Expanded from 22 - 28mm to 22 - 35mm